Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the indicator light on an Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we see how to replace the clutch cable on an Opel Corsa C. The clutch cable is a mechanical component related to the clutch system, and its purpose is to reduce the resistance of the lever, making it softer and easier to operate. On the Corsa C it is mounted at the top of the swing arm, so we need to lift the car and remove the right wheel, then remove the bolt that secures the swing arm, and then with a 17 key we remove the bolts that we find at the top of it, in order to remove the component.

Let's replace it with the new one by reassembling the three 17 bolts and then reattach the swing arm to the wheel.


Posted on 23 September 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Life on a 2018 Opel Corsa
How to Reset the Oil Life on a 2018 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In this tutorial, you will learn how to reset the oil life on a 2018 Opel Corsa by following some simple steps that will allow you to work independen…
Location of Fuse Box on Opel Corsa D
Location of Fuse Box on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In today's video, you will see the location of the fuse box on an Opel Corsa D, following the instructions below. First, get inside the vehicle and l…
How to replace the cooling radiator on the Opel Corsa
How to replace the cooling radiator on the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Today's main steps will show us how to disassemble and replace the engine cooling radiator of the Opel Corsa. First, we open the hood of the car and …

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos