Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Electric Power Steering Motor on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Electric power steering motor

The main instructions in this guide will show you how to remove and replace the electric power steering motor on an Opel Corsa. First, lift the vehicle and begin by removing the front right wheel, disconnecting the wishbone and the driveshaft. To access the power steering motor, it is necessary to disconnect the exhaust manifold, as shown in the video. At this point, remove the bolts of the electric power steering unit, take it out, and replace it with the new original one. Reassemble and connect the new component, checking its proper operation.

Posted on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on an Opel Corsa
How to Remove the Starter Motor on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Need to replace the starter motor on an Opel Corsa if damaged? Here’s how to remove it. Open and lift the front bonnet, disconnect the battery termin…
Removing the Starter Motor from an Opel Corsa
Removing the Starter Motor from an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Is the starter motor on the Opel Corsa faulty? Here’s how to remove it from the engine bay. Open and lift the front bonnet, disconnect the battery te…
Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Vauxhall Corsa (2000-2006 / Corsa C) In this video, you will see the main steps to remove the starter motor from an Opel Corsa, as well as from Fiat and Lancia models with the 1300 Multi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos