Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter in a Maruti Alto 800?

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Fuel filter

Replacing the fuel filter in a Maruti Alto 800 is a very simple and quick operation. First, lift the left rear area of the car with a jack, then locate the filter positioned right in front of the wheel. Next, remove the two mounting bolts of the bracket, disconnect both hoses, and quickly reconnect them to the replacement filter to avoid excessive fuel loss. Once done, tighten the two bolts and ensure that each component is securely fastened.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Maruti Alto 800
How to Replace the Cabin Air Filter in a Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) If you own a Maruti Alto 800 and it's time to replace the cabin air filter, read this guide carefully and follow the step-by-step procedure. First, m…
How to Replace the Air Filter in a Maruti Alto 800?
How to Replace the Air Filter in a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) In this tutorial, you will see how to replace the air filter in a Maruti Alto 800, a very simple and economical task. Before proceeding, wait for the…
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos