Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto 800
    4. : How to synchronize the engine of the Suzuki Alto 800 - Maruti Alto 800.

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Checks and maintenance
Operation: How to synchronize the engine of the Suzuki Alto 800 - Maruti Alto 800.

Today's guide will show us the main steps necessary to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, we open the vehicle's engine hood and remove the distribution cover; we then verify that the notches on the valve pulley and the one on the engine block are perfectly aligned, according to the valve settings provided by the manufacturer. We then check the correct positioning of the valves; usually, timing is done with every timing belt change.


Posted on 4 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Alto 800 2012-2023 - When the Maruti Alto, could it have engine starting problems? Read Answer
    • Alto 800 2012-2023 - What can cause problems in starting the Maruti Alto 800 and how to solve them? Read Answer
    • Alto 800 2012-2023 - What to do if the Maruti Alto 800 has starting problems? Read Answer
    • Alto 800 2012-2023 - What problems does the Maruti Alto 800 have at the start? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos