Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto
    4. : Replacement of the timing belt for the Maruti Alto.

Maruti Alto - Video tutorial

Model: Maruti Alto RF - Years 2000-2014
Part: Timing belt
Operation: Replacement of the timing belt for the Maruti Alto.

Today we will see the main steps that will allow us to disassemble and replace the timing belt of the Maruti Alto and Suzuki Alto. First of all, we open the engine hood and start by disassembling and removing the front bumper, unscrewing all the fixing screws; then we disconnect the alternator belt, subsequently removing the engine pulley, as shown in the video. At this point, we remove the distribution cover and disassemble the engine support; then we perform the belt replacement procedure, following the video tutorial until the end!


Posted on 18 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos