Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wipers on the Maruti Alto

Model: Maruti Alto AOD - Years 2012-2019
Part: Windshield wipers

Today, we will see in this video tutorial how to remove and replace the front wipers on the Maruti Alto in simple steps. First, move to the front of your car and start lifting the wiper arm; then rotate it and release the clip to detach and remove it from the arm, as shown in the video. At this point, install the new wiper, which should be the same size as the original; reattach and secure the new wiper blade onto the arm by applying the reverse procedure!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Maruti Alto
Replacing the Timing Belt on a Maruti Alto
Maruti Alto (2000-2014 / RF) Today, let's go through the main steps to remove and replace the timing belt on a Maruti Alto and Suzuki Alto. First, open the hood and start by remo…
How to replace the headlight bulb on a Maruti Alto?
How to replace the headlight bulb on a Maruti Alto?
Maruti Alto (2000-2014 / RF) To replace the headlight bulb on a Maruti Alto, lift the hood to expose the screws that secure the headlight assembly from the top: by loosening thes…
Where is the fuse box of the Maruti Alto located?
Where is the fuse box of the Maruti Alto located?
Maruti Alto (2012-2019 / AOD) The Maruti Alto vehicles have two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the passenger side glove com…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos