Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a Maruti Alto?

Model: Maruti Alto RF - Years 2000-2014
Part: Headlight

To remove the front headlight on a Maruti Alto, loosen the screws that secure the front bumper: these are located at the top of the bumper, accessible by opening the hood. After removing these screws, you can loosen those inside the wheel well and completely detach the bumper. This way, you can access the screws that hold the headlight in place and fully extract it by disconnecting the connectors at the back. At this point, connect the new headlight and secure it in its housing.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on a Maruti Alto?
How to replace the headlight bulb on a Maruti Alto?
Maruti Alto (2000-2014 / RF) To replace the headlight bulb on a Maruti Alto, lift the hood to expose the screws that secure the headlight assembly from the top: by loosening thes…
How to Replace the Headlights on a Maruti Alto?
How to Replace the Headlights on a Maruti Alto?
Maruti Alto (2000-2014 / RF) In this tutorial, you will see how to replace the headlights on a Maruti Alto, a very simple and quick operation. First, ensure the key is not in the…
Where is the fuse box of the Maruti Alto located?
Where is the fuse box of the Maruti Alto located?
Maruti Alto (2012-2019 / AOD) The Maruti Alto vehicles have two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the passenger side glove com…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos