Do it yourself
| ||||
|
Maruti Alto - Video tutorial
Model: Maruti Alto
RF
- Years 2000-2014 In order to replace the headlight bulb of the Maruti Alto, you need to lift the hood so that the screws holding the headlight assembly from the top are visible. By loosening these screws and disconnecting the connector, you will be able to remove the headlight and remove its inner protective cover. The bulb inside the headlight assembly can then be removed and replaced with a new replacement piece; after the replacement, you can reattach the headlight with its screws, reconnect the connector, and verify that it functions correctly.
Posted on 3 April 2024 by ScegliAuto
Other guides that may interest you
|
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |