Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulbs in a Maruti Alto LX?

Model: Maruti Alto AOD - Years 2012-2019
Part: Tail light bulb

Replacing the tail light bulbs in a Maruti Alto LX, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the trunk lid, then unscrew the two bolts located on the inner side of the light assembly. Once done, grasp the assembly, pull it towards you, and disengage it from the body. To remove a bulb from the socket, simply turn the bulb holder counterclockwise, while it will need to be turned clockwise to secure it.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tail Lights on a Maruti Alto LX?
How to Remove the Tail Lights on a Maruti Alto LX?
Maruti Alto (2000-2014 / RF) As seen in this tutorial, removing the tail lights on a Maruti Alto LX is a very simple and quick operation. Before proceeding, ensure the key is not…
How to adjust the handbrake of the Maruti Alto
How to adjust the handbrake of the Maruti Alto
Maruti Alto (2012-2019 / AOD) In this short and simple guide, we will see how to adjust the handbrake lever of the Maruti Alto and Suzuki Alto. First of all, we get into the car a…
How to Replace the Fuel Filter on a Maruti Alto?
How to Replace the Fuel Filter on a Maruti Alto?
Maruti Alto (2000-2014 / RF) In this tutorial, you will see how to replace the fuel filter on a Maruti Alto, a task that is extremely simple and quick. First, open the fuel tank …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos