Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Maruti Swift?

Model: Suzuki Maruti Swift Rs413, Rs415, Rs413d - Years 2005-2021
Part: Tail light

As seen in this tutorial, replacing the rear lights on a Maruti Swift is an extremely simple operation. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the boot, then unscrew the two fixing bolts of the light located along the inner edge. Once done, grasp the light, pull it outwards, and extract it from the bodywork. Finally, disconnect the power connector, remove the bulbs, and fit the replacement by simply following the reverse procedure.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install LED Lights in the Maruti Swift?
How to Install LED Lights in the Maruti Swift?
Suzuki Maruti Swift (2005-2021 / Rs413, Rs415, Rs413d) In the Maruti Swift, you can upgrade the lights by replacing the standard halogen bulbs with LED ones that provide much more light. The procedure for…
How to Replace the Rear Shock Absorber on a Maruti Swift?
How to Replace the Rear Shock Absorber on a Maruti Swift?
Suzuki Maruti Swift (2005-2021 / Rs413, Rs415, Rs413d) To replace the rear shock absorber on a Maruti Swift, lift the car using a jack so that the corresponding wheel is not in contact with the ground. Th…
How to Replace the Rear Brake Shoes on the Maruti Swift?
How to Replace the Rear Brake Shoes on the Maruti Swift?
Suzuki Maruti Swift (2005-2021 / Rs413, Rs415, Rs413d) To replace the rear brake shoes on the Maruti Swift, lift the car so you can unscrew the bolts securing the wheel to the hub. Once the wheel is remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos