Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto
    4. : How to remove the bumper of the Maruti Alto 800.

Maruti Alto - Video tutorial

Model: Maruti Alto AOD - Years 2012-2019
Part: Bodywork
Operation: How to remove the bumper of the Maruti Alto 800.

If we want to proceed with removing the front bumper on this car model, in the description below we will find the necessary information and the various steps to be taken and we can also take a look at the video tutorial. After opening the engine hood, proceed to unscrew the screws on the top of the grille. Then proceed to unclip the bumper connection clips from the fenders. Next, remove all the clips around the bumper and also the screws under the engine connecting it to the fender panel. At this point, the bumper can be removed.


Posted on 14 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos