Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Battery of a Maruti

Model: Maruti Alto AOD - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

To replace the battery of a Maruti Alto key fob, you will only need a small flathead screwdriver and a new battery. The required battery model is a flat CR 2032 3V. First, slide the lever located on the back of the case to extract the metal key inside.

Next, use the screwdriver: insert the tip into the top edge of the fob (short side) and pry it open. Then, remove the old battery and replace it with the new one.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Maruti Alto (2012-2019 / AOD) If your Maruti Alto key has suddenly stopped working, you likely need to replace the battery inside. If you don't know how to do it, carefully read t…
Maruti Alto (2000-2014 / RF) To properly replace the battery inside your Maruti Alto Mk1 key, follow these simple steps. First, open the cover by applying light pressure with you…
Maruti Alto (2012-2019 / AOD) Replacing the tail light bulbs in a Maruti Alto LX, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure the k…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos