Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag from the Suzuki Vitara/Brezza

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Airbag

How do you remove the airbag from the Suzuki Vitara/Brezza? It is a simple operation, but it always requires disconnecting the battery beforehand to avoid any risk of it exploding in your face. We need to turn the steering wheel all the way to the right, and insert a small screwdriver into the hole we find on the back, in order to release the first retaining spring of the airbag. We will do the same operation on the other side, turning the steering wheel completely in the opposite direction to also release the second spring. Once this is done, we can gently pull the airbag towards us, and then remove the electrical connectors that still connect it to the steering wheel, and that's it.

Posted on 3 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Steering Wheel Airbag on a Maruti Vitara Brezza
Replace the Steering Wheel Airbag on a Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) Today, we will go through the main steps to remove and replace the steering wheel airbag on the Maruti Vitara Brezza, following the instructions belo…
How to Set the Clock on the Suzuki Vitara Brezza
How to Set the Clock on the Suzuki Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) To set the clock on the Suzuki Vitara Brezza, turn the ignition key to the ON position. Then, press and hold the two buttons located on either side o…
How to Find the Fuse Diagrams of a Maruti Suzuki Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) The first fuse diagram shown in the video pertains to the fuse box located in the engine compartment; this box contains fuses assigned to: ignition c…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos