Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Steering Wheel Airbag on a Maruti Vitara Brezza

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Airbag

Today, we will go through the main steps to remove and replace the steering wheel airbag on the Maruti Vitara Brezza, following the instructions below. First, get inside the vehicle on the driver's side and insert something thin and pointed (like a screwdriver) into the holes to release and remove it; finally, disconnect the electrical connector found on the back, as shown in the video. At this point, if necessary, remove the steering wheel; then replace the steering wheel airbag and reassemble everything!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the airbag from the Suzuki Vitara/Brezza
How to remove the airbag from the Suzuki Vitara/Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) How do you remove the airbag from the Suzuki Vitara/Brezza? It is a simple operation, but it always requires disconnecting the battery beforehand to …
How to Replace the Front Wheel on the Maruti Vitara Brezza
How to Replace the Front Wheel on the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the front wheel on the Maruti Vitara Brezza, open the rear hatch of the vehicle to access the trunk area. Under the trunk carpet, you will…
Where Are the Fuses on the Maruti Vitara Brezza?
Where Are the Fuses on the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) The fuse boxes on the Maruti Vitara Brezza contain the fuses that manage the operation of the devices installed in the vehicle: in this type of car, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos