Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Suspension on a Maruti Eeco

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Suspension system

To replace the suspension on a Maruti Eeco, lift the vehicle with a jack or lift so that the wheels are not in contact with the ground. This will allow you to loosen the bolts that secure the wheels to the hubs, providing access to their components at the rear. You will need to unscrew all the screws that secure the shock absorbers, control arms, etc., detaching all components from the axle. This way, you can install all the new parts, securing them with the previously removed bolts along with the corresponding wheels.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Tire from a Maruti Eeco
How to Remove the Spare Tire from a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) In this video tutorial, you will see how to disassemble and remove the spare tire from its compartment in a Maruti Eeco, following the instructions p…
How to Replace the Serpentine Belt on a Maruti Eeco?
How to Replace the Serpentine Belt on a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) To replace the serpentine belt on a Maruti Eeco, lift the vehicle and loosen the bolts that secure the right front wheel, completely removing it. Onc…
How to Replace the Cabin Filter in the Maruti Eeco Van?
How to Replace the Cabin Filter in the Maruti Eeco Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, gras…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos