Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Serpentine Belt on a Maruti Eeco?

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: V-belt

To replace the serpentine belt on a Maruti Eeco, lift the vehicle and loosen the bolts that secure the right front wheel, completely removing it. Once the wheel and the inner fender cover are removed, slide the belt off the pulleys to install the new one. The new belt must be properly installed and tensioned correctly. After the new belt is installed, reattach the fender cover and the corresponding wheel.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to remove the air filter in the Maruti Eeco to clean or replace it directly. Before proceeding, ensure the engine is comple…
Maruti Eeco (2010-2024 / MK 1) In this video tutorial, you will see how to disassemble and remove the spare tire from its compartment in a Maruti Eeco, following the instructions p…
Maruti Eeco (2010-2024 / MK 1) To replace the sliding door handle on a Maruti Eeco, unscrew the screws that secure the inner panel of the door so that it can be removed, giving acc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos