Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter on a Maruti Celerio?

Model: Suzuki Maruti Celerio MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

Video tutorial

In this tutorial, see how to remove the air filter on a Maruti Celerio. This operation is very simple and quick, to be done when you need to clean or replace it. First, ensure that the engine is completely cold, then open the bonnet and locate the airbox on your right.

Next, unlock the front metal clips, loosen the screw of the collector clamp, and lift the upper half of the box. At this point, you can extract the old filter, clean the housing of any debris, and fit the replacement by following the reverse procedure.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on the Maruti Celerio
How to Replace the Engine Air Filter on the Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) To replace the engine air filter on the vehicle, you need to: open the bonnet, disconnect the air intake hose located on the left side of the engine,…
How to Replace the Cabin Filter in the Maruti Celerio?
How to Replace the Cabin Filter in the Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) As shown in this tutorial, replacing the cabin filter in the Maruti Celerio is a very simple and quick task. First, sit in the passenger seat, then o…
How to Replace the Air Filter on a Maruti Celerio
How to Replace the Air Filter on a Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) To replace the engine air filter as recommended in the service schedule for this vehicle, follow the instructions below and refer to the video images…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos