Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel with the Spare on a Maruti Celerio

Model: Suzuki Maruti Celerio MK 1 - Years 2014-2023
Part: Wheel

In this brief and simple guide, you will learn how to remove and replace the wheel with the spare on a Maruti Celerio, following the instructions below. First, get inside the vehicle and engage first gear and the handbrake; then unscrew the wheel securing bolts using the provided wrench, as shown in the video. At this point, use the jack to lift the wheel off the ground so you can remove it; then install the new spare wheel or space-saver, hand-tightening the bolts and tightening them in a cross pattern, following the video until the end!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Spare Wheel on the Maruti Celerio?
Where is the Spare Wheel on the Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) The spare wheel on the Maruti Celerio is located inside the boot of the vehicle. To access the spare wheel, open the tailgate and lift the carpet at …
How to replace the front bumper on the Maruti Celerio?
How to replace the front bumper on the Maruti Celerio?
Suzuki Maruti Celerio (2014-2023 / MK 1) To replace the front bumper on the Maruti Celerio, open the bonnet to access the screws and rivets that secure the bumper at the front. Once these fa…
How to Replace the Front Brake Pads on a Maruti Celerio
How to Replace the Front Brake Pads on a Maruti Celerio
Suzuki Maruti Celerio (2014-2023 / MK 1) In this tutorial video, you will learn how to remove and replace the front brake pads on a Maruti Celerio, following these simple steps. First, lift …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos