Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on a Maruti Ertiga vehicle?

Model: Maruti Ertiga MK 1 - Years 2012-2018
Part: Clock

Setting the clock on a Maruti Ertiga vehicle is a very simple operation, achievable in a few minutes. The first thing to do is to get inside the car and turn on the instrument panel. Then, you will need to simultaneously press the two buttons located on the instrument panel, which will activate the clock menu. After that, you will need to press the right button to set the hours, press the left button to confirm and move on to setting the minutes. Repeat the same process and then turn off the panel. Turn on the instrument panel again and verify that the correct time has been set.

Posted on 17 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on a Suzuki/Maruti Ertiga?
How do you set the clock on a Suzuki/Maruti Ertiga?
Maruti Ertiga (2012-2018 / MK 1) In this video we see how to set the clock on a Suzuki or Maruti Ertiga (it is the same model produced by two affiliated brands) on the instrument pan…
How to set the time on the Maruti Ertiga's clock
How to set the time on the Maruti Ertiga's clock
Maruti Ertiga (2012-2018 / MK 1) Today we will explain how to adjust the time on the display of the Maruti Ertiga's onboard computer or instrument panel by yourself. To perform this …
How to manually set the time on the Maruti Ertiga?
How to manually set the time on the Maruti Ertiga?
Maruti Ertiga (2012-2018 / MK 1) If the clock on the instrument panel of your Maruti Ertiga first generation (year 2012-2018) is displaying the wrong time and you want to manually ad…

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos