Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. Maxus T60
    4. : Timing belt

Maxus T60 - Timing belt

Maxus T60 (2016-2023 / MK 1)
Guide to replacing the timing belt of the MG T60 - Maxus T60.
In this guide, we will see the procedure that will allow us to disassemble and replace the timing belt of the Maxus T60 and MG T60. First, we open the engine …read all…
Posted on 23 June 2023 by ScegliAuto
Car stereo (4) Key (1) Locking the trunk (1) Timing belt (1) V-belt (1) -board computer (1) Checks and maintenance (11) Dashboard (1) Headlight (2) Air filter (1) Cabin air filter (1) Petrol filter (2) Gear oil (1) Engine oil (1) Door panel (2) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos