Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. Maxus T60
    4. : Car stereo

Maxus T60 - Car stereo

Maxus T60 (2016-2023 / MK 1)
To set the time on a Maxus T60 radio.
Setting the time on the radio of a Maxus T60 is a very simple operation that can be done independently, thanks also to our short video tutorial. The first step …read all…
Posted on 30 September 2023 by ScegliAuto
Maxus T60 (2016-2023 / MK 1)
How to disassemble the central display of the Maxus T60 car radio
In today's video tutorial we will see how to disassemble and replace the Maxus T60 car radio display by following these simple and quick steps. First we get on …read all…
Posted on 24 November 2022 by ScegliAuto
Maxus T60 (2016-2023 / MK 1)
How do you replace the Maxus T60 car stereo?
In order to replace the Maxus T60 car radio, you need to remove the plastic covers found on the central panel, around the car radio. Once all the panels have …read all…
Posted on 17 November 2022 by ScegliAuto
Maxus T60 (2016-2023 / MK 1)
How to replace the Maxus T60 car stereo
Let's find out in this guide the main steps that will allow us to disassemble and replace the series car radio of the Maxus T60. First of all we get on board …read all…
Posted on 21 June 2022 by ScegliAuto
Car stereo (4) Key (1) Locking the trunk (1) Timing belt (1) V-belt (1) -board computer (1) Checks and maintenance (11) Dashboard (1) Headlight (2) Air filter (1) Cabin air filter (1) Petrol filter (2) Gear oil (1) Engine oil (1) Door panel (2) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos