Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting LED Lights to Your Car

Model: Mazda Mx 5 NB, MK 2 - Years 1998-2005
Part: Accessory kit

The term LED stands for "Light Emitting Diode". Installing LEDs in vehicles requires minimal time and effort. This guide explains how to fit economical LEDs to your car. First, obtain the LEDs, a soldering iron, two electrical wires, a small switch, and solder. At this point, insert the lights into the designated space, then take the wires and proceed with the soldering. Keep in mind not to exceed 12 volts and use a 500 Ohm resistor.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Installing LED Headlight Bulbs
Instructions for Installing LED Headlight Bulbs
Mazda Mx 5 (1998-2005 / NB, MK 2) Replacing the original headlight bulbs with LED ones instead of xenon will give the vehicle a significantly more modern appearance and improve visibi…
How to Restart Your Car's Engine
How to Restart Your Car's Engine
Mazda Mx 5 (1998-2005 / NB, MK 2) Sometimes batteries run flat unexpectedly if headlights or lights are left on, making this issue more common than you might think. In such cases, do …
How to reset the maintenance light on the Mazda MX5
How to reset the maintenance light on the Mazda MX5
Mazda Mx 5 (2015-2024 / MK 4, ND) In this video we can see how to reset the maintenance light of a Mazda MX5, also known as "Miata". We get in the car and turn the headlight switch to…

How to Change the Brake Pads on a Volkswagen New Beetle

Learn how to change the front brake pads on a Volkswagen New Beetle. First, lift the car on a column lift to the desired height, then remove the wheel (using a telescopic spanner or air impact wrench) along with the respective bolts. Unscrew the locking bolt of the brake caliper, remove it from the wheel hub support, and detach the pads from the brake caliper using a screwdriver. Install the new pads on the brake caliper and refit the brake caliper to the support; tighten all bolts and remount the wheel. Proceed to perform the same operations on the other calipers present on the vehicle.

Watch the video!


by ScegliAuto

More videos