Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Brake Pads on a Volkswagen New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Brake pads

Learn how to change the front brake pads on a Volkswagen New Beetle. First, lift the car on a column lift to the desired height, then remove the wheel (using a telescopic spanner or air impact wrench) along with the respective bolts. Unscrew the locking bolt of the brake caliper, remove it from the wheel hub support, and detach the pads from the brake caliper using a screwdriver. Install the new pads on the brake caliper and refit the brake caliper to the support; tighten all bolts and remount the wheel. Proceed to perform the same operations on the other calipers present on the vehicle.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake Disc on a New Beetle
Replacing the Brake Disc on a New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Are the front brake pads worn? Do you want to replace the disc? Here’s how to remove a disc on a New Beetle. Raise the car to a comfortable working h…
Replacing Front Brake Discs on VW Beetle
Replacing Front Brake Discs on VW Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Are the front brake pads worn out? Here's how to remove them on a New Beetle. Lift the car to a comfortable height using a jack. Undo the bolts with …
Replacing Brake Pads
Replacing Brake Pads
Volkswagen New Beetle (1999-2012 / MK 2, 9C) This video tutorial shows the procedure for replacing the brake pads on a Volkswagen New Beetle. The wheel has already been removed and the vehicle h…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos