Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

Today, we will go through the instructions that will allow you to remove and replace the front brake pads on the Volkswagen New Beetle. First, lift the vehicle and begin to remove the front wheel; then unscrew the fixing screws of the front brake caliper, removing it from the disc, as shown in the video.

At this point, apply pressure to the caliper piston to remove the old brake pads, cleaning off any residual dirt; then install the new original brake pads, finally reassembling the brake system and the rear wheel!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Replacing Brake Pads
Replacing Brake Pads
Volkswagen New Beetle (1999-2012 / 9C, MK 2) This video tutorial shows the procedure for replacing the brake pads on a Volkswagen New Beetle. The wheel has already been removed and the vehicle h…
Removing the Front Bumper of the Volkswagen New Beetle
Removing the Front Bumper of the Volkswagen New Beetle
Volkswagen New Beetle (1998-2005 / ) This guide outlines the main steps to remove and replace the front bumper of the Volkswagen New Beetle. First, open the bonnet and start by removing …
How to Replace the Headlight Bulbs on the Volkswagen New Beetle?
How to Replace the Headlight Bulbs on the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this tutorial, you will see how to replace the headlight bulbs on the Volkswagen New Beetle, a very simple and quick operation. First, ensure that…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos