Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Cls
  6. : Front bumper

Mercedes CLS - Front bumper

Front Bumper Mercedes CLS (2010-2018 / mk 2, c 218)

Mercedes CLS (2010-2018 / MK 2, C218)
Removing the Front Bumper of the Mercedes CLS

The steps outlined in this guide will allow you to remove and replace the front bumper of the Mercedes CLS. First, open the bonnet of the vehicle and begin …Read all…
Posted on 30 May 2026 by ScegliAuto

Car stereo (1) Anti-roll bar (1) Battery (2) Transmission (1) Spark plugs (1) Key (2) V-belt (1) Onboard computer (1) Checks and maintenance (2) Dashboard (1) Side marker light (1) Headlight (3) Air filter (2) Cabin air filter (2) Light bulb (2) Tail light bulb (1) Engine oil (1) Clock (1) Front bumper (1) Tires (1) Fuel pump (2) Radiator (2) Fuse box (9) AdBlue warning light (1) (1) Tire pressure warning light (2) Service warning light (10) Windshield wipers (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos