Do it yourself
Frequently asked questions about cars and motorcycles

Removing the door panel of the Mercedes GL

Model: Mercedes Gl X164, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

This brief and simple information will allow you to remove and replace the front door panel of the Mercedes GL. First, open the front door and start by removing the plastic cover found under the grab handle, prying it off from the sides; then unscrew the fixing screws located underneath and subsequently remove the door switch panel, as shown in the video.

At this point, pry off the sides to detach and remove the door panel, applying the reverse procedure for reassembly!


Updated on 30 October 2026 by ScegliAuto


Related tutorials

Mercedes Gl (2012-2019 / X166, MK 2) Here’s how to install the Mercedes logo projector on the puddle light of a Mercedes GL: you can find the projectors on AliExpress with code 100500874…
Mercedes Gl (2012-2019 / X166, MK 2) In this new guide aimed at those of you who own a 2014 Mercedes GL450, we will explain how you can independently remove the door panel. First of all,…
Mercedes Gl (2006-2012 / X164, MK 1) Today's main instructions will allow us to disassemble and replace the rear bumper of the Mercedes GL. First, we open the rear trunk door and start u…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos