Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Rear Lights on the Mercedes GLA?

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

In this tutorial, see how to dismantle the rear lights on the Mercedes GLA, a very simple and quick operation. First, ensure the key is not inserted for safety.

Then, open the tailgate and remove the panel located at the back of the light in question. Next, unscrew the indicated white plastic bolt, grasp the light, and separate it from the bodywork.

At this point, disconnect the power connectors, replace any damaged elements, and reassemble everything by following the reverse procedure.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Lights of the Mercedes GLA Class
How to Remove the Rear Lights of the Mercedes GLA Class
Mercedes Gla (2013-2019 / W156, MK 1) In this video, see how to remove the rear lights of the Mercedes GLA Class: first, you need to remove the glove compartment near the light you want t…
Replacement of the rear taillight of the Mercedes GLA MK1
Replacement of the rear taillight of the Mercedes GLA MK1
Mercedes Gla (2013-2019 / W156, MK 1) The rear lights of the Mercedes GLA are exposed to impacts, which can compromise their integrity and no longer guarantee a watertight seal; this has …
How to Remove the Front Brake Pads on a Mercedes GLA
How to Remove the Front Brake Pads on a Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Before you can start, lift the front of your Mercedes GLA. Begin by removing the left front wheel by unscrewing the fixing bolts. Next, unscrew and r…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos