Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gla
    4. : How to remove the front brake pads of a Mercedes GLA

Mercedes Gla - Video tutorial

Model: Mercedes Gla W156, MK 1 - Years 2013-2019
Part: Brake pads
Operation: How to remove the front brake pads of a Mercedes GLA

Before we can begin, we will have to lift the front of our Mercedes GLA. So let's start by disassembling and removing the left front wheel, unscrewing the fixing bolts. After that, we will have to unscrew and remove the bolts that secure the brake caliper to the disc, and then move it away slightly. At this point, we will have to disengage and remove the front left brake pads, and we will have correctly completed the relative disassembly. To remove the right front brake pads, we will simply have to repeat this procedure on the right side of our Mercedes GLA, and we will have completely completed the disassembly.


Posted on 3 April 2024 by ScegliAuto



Where is the OBD port located on the 2017 Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) If you own a 2017 Mercedes GLA and want to find out where the OBD port is located to connect any compatible diagnostic tool, then all you have to do
Mercedes CLA, GLA battery removal
Mercedes Gla (2013-2019 / W156, MK 1) In this simple and useful video guide we will see how to identify and remove the battery of the Mercedes GLA or CLA. First of all we need to know tha
How to open the fuel door in the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) In this tutorial we can see how to open the fuel door on the Mercedes GLA, an extremely simple operation that is not different from the standard proc

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos