Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the sun visor flaps in the Mercedes SL?

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Checks and maintenance

In this tutorial we can see how to replace the sun visor in the Mercedes SL, an extremely simple and quick operation. First of all, let's go inside the cabin, then lift the visor in which we will work and, pulling it forcefully outwards, we release the inner pin from its support base. Subsequently, we grab the old visor, extract it from the rod by pulling it towards us, insert the replacement one and hook it by pressing the same pin to the base. Repeat the procedure on the opposite sun visor, if necessary.

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Sun Visor Support Cap
Replacing the Sun Visor Support Cap
Mercedes Sl (1989-2001 / MK 5, R129) If the cap that serves as a cover for the sun visor support breaks, you can easily replace it: remove what remains of the old cap to access the under…
How to Close or Open the Convertible Top on a Mercedes SL 560
How to Close or Open the Convertible Top on a Mercedes SL 560
Mercedes Sl (1989-2001 / MK 5, R129) In this video, see how to close or open the convertible top on a Mercedes SL 560, first series, by following the instructions below. First, remove th…
Instructions for Removing the Rear Bumper of a Mercedes SL R230
Instructions for Removing the Rear Bumper of a Mercedes SL R230
Mercedes Sl (2001-2011 / R230) In this video tutorial, you will learn how to remove and replace the rear bumper of a Mercedes SL R230. First, remove the screws located on both side…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos