|
Do it yourself
| |||
| ||||
How to Remove the Centre Tunnel
Model: Mercedes CL
C215
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
Gently unscrew the gear knob to remove it from the metal shaft. Lever it out sideways to remove the square panel covering the gear lever, taking care to also disconnect the corresponding yellow connector. Now open the ashtray and unscrew the two screws that allow you to remove it along with the connector. Next, unscrew two screws located horizontally at the bottom of the tunnel in the now free area. Detach the side upholstery from the centre tunnel; you will now see two screws securing the tunnel to the dashboard; unscrew them and proceed to lift the centre tunnel.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Mercedes CL
(1999-2006 /
C215)
To remove the car stereo, you need to take off the trim surrounding the centre console.
Pull the gear lever knob upwards to remove it, then unclip an…
Other guides you may be interested in |
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |