Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the seats of the Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Seat

See other generations:
Video tutorial

The following video tutorial will explain how to position the seats of the Mercedes A-Class, after folding them onto themselves to expand the trunk space. The Mercedes we will use as an example was produced from 2011 to 2012. We open the trunk and pull the seat ring towards us, in order to position the seat.

We proceed in the same way with the other seats. After stowing the seat, we insert the headrests into the backrest.

We position the seat belts and make sure the seats are securely in place before getting on board to hit the road.


Posted on 13 July 2025 by ScegliAuto


Related tutorials

How to remove the rear seats of the Mercedes A-Class
How to remove the rear seats of the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and remove the rear seats of the Mercedes A-Class. First, we open the rear doors of the car and start pulling the lever at the bottom of the seats.. …
Removing Seats from Mercedes A-Class
Removing Seats from Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. front seats from a first-generation Mercedes A-Class. First, open all the doors and push the seats back as far as they go: then disconnect the electrical.. …
How to Remove the Front Seats of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. the driver's seat, of the Mercedes A-Class. First, open the front door and start unscrewing the mounting bolts found on the front seat tracks;.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos