Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Seat

See other generations:
Video tutorial

Today's instructions will show us how to disassemble and remove the rear seats of the Mercedes A-Class. First, we open the rear doors of the car and start pulling the lever at the bottom of the seats to lower the backrests; then we pull the seat bench to completely remove it from the cabin, performing the same operation for the other rear seats, as shown in the video.

This way we will significantly increase the cargo volume of the trunk; finally, we reassemble the rear seats, following the reverse process.


Posted on 12 November 2025 by ScegliAuto


Related tutorials

How to adjust the seats of the Mercedes A-Class
How to adjust the seats of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. how to position the seats of the Mercedes A-Class, after folding them onto themselves to expand the trunk space. The Mercedes we will use as an example.. …
Removing Seats from Mercedes A-Class
Removing Seats from Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. front seats from a first-generation Mercedes A-Class. First, open all the doors and push the seats back as far as they go: then disconnect the electrical.. …
Removing Rear Seats on Mercedes A-Class
Removing Rear Seats on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) First, gently remove the plastic clips located at the corners of the rear seats. Then, disengage the seats by pulling them upward with some force, as…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos