Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : Removal of rear seats on Mercedes A-Class

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Seat
Operation: Removal of rear seats on Mercedes A-Class

First, carefully pull out the plastic catches on the corners of the rear seats. Then disengage the seats themselves by pulling them from the bottom up with a little force, as you can see in the video. Already done! As far as the seat is concerned, it is sufficient to do this to free it from its seat: now you can extract the seats from the seats. At this point, unscrew the bolts that secure the brackets of the central seat belt. After taking it out of the bracket, lower the backrests. Now you can see the rear fixing bolts: unscrew them and disconnect the cables, and that's it.


Posted on 20 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2004-2012 - How much does the rear seat of the Mercedes A-Class cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos