Do it yourself
Frequently asked questions about cars and motorcycles

How to recognize a damaged head on a Mercedes Class B W245

Model: Mercedes Classe B W245, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Control arm

See other generations:
Video tutorial

In this video, we are taught how to recognize a damaged ball joint on a Mercedes Class B W245 version: first, we see a new ball joint for comparison, and then the damaged one, with the typical orange color caused by the leaking grease, which oxidizes upon contact with the air; the boot appears empty and flattened.

However, ball joints can have a good external appearance, despite developing play that causes annoying noises and bouncing on bumps.

We can perform a test by grabbing the wheel at 6 o'clock and 12 o'clock, and shaking it slightly: we will hear a sharp metallic noise coming from the ball joint: "clonk", which indicates the need to replace the part. The YouTuber shows us the condition of the ball joint once removed.


Posted on 8 August 2025 by ScegliAuto


Related tutorials

Mercedes Classe B (2005-2011 / W245, MK 1) In this tutorial, you will learn how to remove and replace the serpentine belt on a Mercedes B-Class W245 in simple steps, which also applies to othe…
Mercedes Classe B (2005-2011 / W245, MK 1) Like all other cars or other categories of vehicles in general, the Mercedes Class B W245 also uses a fuse diagram to identify the position of each o…
Mercedes Classe B (2005-2011 / W245, MK 1) Replacing the glow plugs on a Mercedes B-Class, here's how to remove them. Pull the engine compartment release lever located at the bottom left of th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos