Do it yourself
Frequently asked questions about cars and motorcycles

Remove Rearview Mirror and Install LED Bulb on Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

Let's see how to remove the mirror from a Mercedes W176 and replace its bulb with an LED bulb. To remove the outer cover, tilt the mirror forward and pry at various sides to release the clips holding it in place.

Now, to remove the mirror, press on the clips behind it and gently push it outward. Next, remove the two screws located just below the mirror housing.

After unscrewing the screws, detach the three clips that hold the plastic housing for the bulb. Pull the socket out from the plastic housing.

Now we can remove the bulb and replace it with the LED one. Finally, reassemble everything carefully, paying attention to the various clips. Mercedes W176 (2012/2018).


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2012-2018 / W176) .. the exterior rearview mirror of the Mercedes A-Class W176, third series. First, open the front door and start by removing the door panel on the side.. …
Mercedes Classe A (2012-2018 / W176) Today, let's go through the steps to remove and replace the turn signal bulb in the exterior rearview mirror of the Mercedes A-Class. First, move to …
Mercedes Classe A (1997-2004 / W168) This guide provides the main instructions for replacing the glass of the exterior rearview mirror on the Mercedes A-Class. First, approach the rearvi…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos