Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Rearview Mirror of the Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Side mirror

In this video, see how to remove and replace the exterior rearview mirror of the Mercedes A-Class W176, third series. First, open the front door and start by removing the door panel on the side of the mirror, then remove the triangular plastic cover; next, disconnect the adjustment electrical connector and unscrew the three mounting screws of the mirror, as shown in the video. At this point, pull the mirror out from the outside and replace it with the new one; apply the reverse procedure for reassembly!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exterior Rearview Mirror on a Mercedes A-Class
How to Remove the Exterior Rearview Mirror on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Let's see how to proceed with removing an exterior mirror on a Mercedes A-Class. Use a plastic-coated lever to pry between the perimeter of the mirro…
Remove Rearview Mirror and Install LED Bulb on Mercedes A-Class W176
Remove Rearview Mirror and Install LED Bulb on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) Let's see how to remove the mirror from a Mercedes W176 and replace its bulb with an LED bulb. To remove the outer cover, tilt the mirror forward and…
How to Remove the Mirror on Mercedes A-Class
How to Remove the Mirror on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) How to remove the mirror on the Mercedes A-Class? Let's see how to disassemble the mirror and the cover cap. Pry between the perimeter of the mirror …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos