Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Rearview Mirror on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

Let's see how to proceed with removing an exterior mirror on a Mercedes A-Class. Use a plastic-coated lever to pry between the perimeter of the mirror frame and the mirror glass.

Pry until the mirror detaches from the plastic housing (disconnect the power cable); this is a delicate operation as the mirror could break. Press on the locking clips to disconnect the mirror cover, and replace the damaged part with a new one. Be careful to ensure the plastic snap clips engage into the mirror supports.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Replacing the Glass of the Exterior Rearview Mirror on the Mercedes A-Class
Replacing the Glass of the Exterior Rearview Mirror on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. the exterior rearview mirror on the Mercedes A-Class. First, approach the rearview mirror and start by disengaging the mirror glass from the rear support,.. …
How to Replace the Exterior Rearview Mirror on a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. the exterior rearview mirror on a Mercedes A-Class, use a tool to pry off the internal plastic cover located at the mirror. Once the cover is removed,.. …
How to Change the Exterior Rearview Mirror on a Mercedes A-Class
How to Change the Exterior Rearview Mirror on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. the exterior rearview mirror on a Mercedes A-Class. First, open the front door and start removing the door panel; to do this, unscrew all the fastening.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos