Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Turn Signal Light in the Exterior Mirror of the Mercedes CLA

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side marker bulb

See other generations:
Video tutorial

Briefly review the instructions to remove and replace the turn signal bulb in the exterior mirror of the Mercedes CLA. First, move to the outside of the vehicle and pry off the plastic cover located under the mirror to remove the upper cap; this will allow access to the turn signal light.

Disconnect the electrical connector to remove it, as shown in the video.

At this point, replace and install the new turn signal bulb or the entire light assembly, then reattach the mirror cap.


Posted on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace the Bulb in the Mercedes CLA Side Mirror
How to Replace the Bulb in the Mercedes CLA Side Mirror
Mercedes CLA (2013-2019 / C117, X117) To replace the bulb in the external rearview mirror of the Mercedes CLA, manually detach the mirror cap, as it is secured only by its retaining clips…
How to Remove the Exterior Rearview Mirror of the Mercedes CLA
How to Remove the Exterior Rearview Mirror of the Mercedes CLA
Mercedes CLA (2019-2025 / C118, X118) Follow these brief steps to remove and replace the exterior rearview mirror of the Mercedes CLA. First, open the front door and start removing the do…
How to disassemble the external rearview mirror of the Mercedes CLA 250
How to disassemble the external rearview mirror of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) If one of the external rearview mirrors of your first-generation Mercedes CLA 250 is broken or you simply want to replace it with a new one, then all…

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos