Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Rearview Mirror of the Mercedes CLA

Model: Mercedes CLA C118, X118 - Years 2019-2025
Part: Side mirror

Follow these brief steps to remove and replace the exterior rearview mirror of the Mercedes CLA. First, open the front door and start removing the door panel; to do this, unscrew the fastening screws located on the sides and under the grab handle, as shown in the video. At this point, disconnect the handle cable and the electrical connector found at the back; then unscrew the fastening screws of the mirror, pulling it out from the outside, install the new mirror, and finally reattach the interior door panel!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Mercedes CLA 250
How to disassemble the external rearview mirror of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) If one of the external rearview mirrors of your first-generation Mercedes CLA 250 is broken or you simply want to replace it with a new one, then all…
How to Replace the Bulb in the Mercedes CLA Side Mirror
How to Replace the Bulb in the Mercedes CLA Side Mirror
Mercedes CLA (2013-2019 / C117, X117) To replace the bulb in the external rearview mirror of the Mercedes CLA, manually detach the mirror cap, as it is secured only by its retaining clips…
Resetting the service light of the Mercedes CLA
Resetting the service light of the Mercedes CLA
Mercedes CLA (2019-2025 / C118, X118) Below we will discover the procedure to reset the service maintenance light of the Mercedes CLA. First, we get into the car and start the instrument …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos