Do it yourself
Frequently asked questions about cars and motorcycles

How to Access the AdBlue Control Unit of the Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Control unit

See other generations:
Video tutorial

The instructions in this guide will show you how to access the AdBlue control unit of the Mercedes C-Class. First, open the trunk lid and start removing the interior trim located on the right side; inside, you will find the AdBlue system control unit, as shown in the video.

To remove the control unit, simply unscrew the mounting screws and disconnect the power wiring; perform any necessary repairs or replacement of the control unit, reconnecting it and finally reassembling the outer trim.


Posted on 6 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) ..ow to reset the warning on a Mercedes-Benz C-Class. First, refill the AdBlue tank using a jug or at a pump until full. Then, connect your diagnostic s.. …
Mercedes Classe C (2014-2021 / W205) .. AdBlue liquid top-up warning on the Mercedes C-Class. First, we get into the car and start the instrument panel; then we connect the appropriate tool.. …
Mercedes Classe C (2000-2007 / W203) .. transmission control module on the Mercedes C-Class W203, as well as on other models from the manufacturer (such as the A-Class W163). First, disconnect.. …

How to Replace the Battery in a BMW 2 Series Active Tourer?

To replace the battery in a BMW 2 Series Active Tourer, open the hood to access the components in the engine compartment: in the upper right corner, just below the windshield on the driver's side, you will find a panel to remove. The battery is located under this panel and can be removed by loosening the screws that secure it and disconnecting the power cables; this will allow you to connect and install the new battery to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos