Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Radio on a Mercedes GL 450

Model: Mercedes Gl MK 1, X164 - Years 2006-2012
Part: Warning light – error code

In today's tutorial video, we will see the procedure for resetting the car radio on a Mercedes Benz GL 450 in simple steps. First, lift the rear seat to access the unit of your car radio; you will be working directly on it to resolve the radio issue. At this point, disconnect the electrical connectors for a few minutes before reconnecting them; now turn on the vehicle's ignition and check that your car radio has reset, verifying its operation!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in the Mercedes GL 450?
How to Reset the Service Light in the Mercedes GL 450?
Mercedes Gl (2012-2019 / X166, MK 2) Resetting the service light in the Mercedes GL 450, as shown in this tutorial, is a straightforward and quick operation. Before proceeding, ensure al…
How to Remove the Ignition Switch on the Mercedes GL 450
How to Remove the Ignition Switch on the Mercedes GL 450
Mercedes Gl (2006-2012 / MK 1, X164) In this short video, see the step-by-step instructions to remove and replace the ignition switch on the Mercedes GL 450 in simple and quick steps. Fi…
How to Remove the Window Switch in a Mercedes GL 450
How to Remove the Window Switch in a Mercedes GL 450
Mercedes Gl (2006-2012 / MK 1, X164) This short video will show you how to remove and replace the window switch in your Mercedes GL 450 ML-Class - R very easily. To perform this operatio…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos