Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gl
    4. : Warning light – error code

Mercedes Gl - Warning light – error code

Warning Light – Error Code Mercedes Gl (2006-2012 / mk 1, x 164)

Mercedes Gl (2006-2012 / MK 1, X164)
How to Reset the SRS Light on a Mercedes GL550 X164
To reset the SRS light on a Mercedes GL550 X164, produced from 2006 to 2012, you will need an OBD2 diagnostic tool. First, turn on the vehicle's ignition. …Read all…
Posted on 3 September 2026 by ScegliAuto
Mercedes Gl (2006-2012 / MK 1, X164)
How to Reset the Radio on a Mercedes GL 450
In today's tutorial video, we will see the procedure for resetting the car radio on a Mercedes Benz GL 450 in simple steps. First, lift the rear seat to access …Read all…
Posted on 16 May 2026 by ScegliAuto
Shocks (1) Car stereo (1) Battery (1) Control arm (2) Control unit (1) Wheel rim (1) Key (1) Timing belt (1) Air conditioner (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Brake rotors (3) Fog lights (2) Air filter (3) Cabin air filter (3) Parking brake (1) Window switch (1) Light bulb (1) Side marker bulb (1) Headlight bulb (4) Starter motor (1) Transmission fluid (1) Clock (4) Door trim panel (2) Front bumper (1) Rear bumper (1) Car door (3) Power window switch (1) Instrument cluster (1) Radiator (1) Fuse box (7) AdBlue warning light (2) Warning light – error code (2) (1) Service warning light (10) Fuel cap (2) Windshield wipers (1) Drivetrain (2) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos