Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gl
    4. : Control arm

Mercedes Gl - Control arm

Control Arm Mercedes Gl (2006-2012 / mk 1, x 164)

Mercedes Gl (2006-2012 / MK 1, X164)
Replacement of Car Arm
If the suspension arm of your car is deformed or worn, possibly due to an impact, it needs to be replaced to avoid a dangerous loss of control. This is not a …Read all…
Posted on 5 March 2026 by ScegliAuto
Mercedes Gl (2006-2012 / MK 1, X164)
How to Replace the Front Wishbone
Place the car on a ramp and lift it to a comfortable working height. Remove the wheel corresponding to the wishbone you are replacing. Locate the position of …Read all…
Posted on 4 March 2026 by ScegliAuto
Shocks (1) Car stereo (1) Battery (1) Control arm (2) Control unit (1) Wheel rim (1) Key (1) Timing belt (1) Air conditioner (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Brake rotors (3) Fog lights (2) Air filter (3) Cabin air filter (3) Parking brake (1) Window switch (1) Light bulb (1) Side marker bulb (1) Headlight bulb (4) Starter motor (1) Transmission fluid (1) Clock (4) Door trim panel (2) Front bumper (1) Rear bumper (1) Car door (3) Power window switch (1) Instrument cluster (1) Radiator (1) Fuse box (7) AdBlue warning light (2) Warning light – error code (2) (1) Service warning light (10) Fuel cap (2) Windshield wipers (1) Drivetrain (2) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos