Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gl
    4. : Replacement arm of the car

Mercedes Gl - Video tutorial

Model: Mercedes Gl MK 1, X164 - Years 2006-2012
Part: Arm
Operation: Replacement arm of the car

If the suspension arm of our car is deformed or worn, perhaps following a collision, it must be replaced to avoid a dangerous loss of the vehicle. It is not a very complicated job to do and you can do it yourself, saving some money. The first thing to do is to lift the car. Then remove the hub cap and take out the wheel. The stabilizer bar will then be detached using two wrenches 14. Once the joint has been removed, the suspension arm will be right in front of us, fixed by means of screws that will be unscrewed so that it can be extracted.


Posted on 14 September 2023 by ScegliAuto



How to replace the front arm.
Mercedes Gl (2006-2012 / MK 1, X164) Place the car on the deck and raise it to a comfortable height to be able to work on it. Remove the wheel corresponding to the arm to be replaced. Id
Rear wiper blade replacement
Mercedes Gl (2006-2012 / MK 1, X164) Replacing the rear wiper blade is a maintenance that is often neglected but which is essential when you have to perform a reverse maneuver and the re
Replacing the air filter on Mercedes Gl
Mercedes Gl (2006-2012 / MK 1, X164) When working with the engine off and the handbrake applied, raise the hood and stop it safely. Start by removing the post / support under the hood an

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos