Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gl
    4. : Brake rotors

Mercedes Gl - Brake rotors

Brake Rotors Mercedes Gl (2006-2012 / mk 1, x 164)

Mercedes Gl (2006-2012 / MK 1, X164)
How to Change the Front Brake Discs and Pads on a Mercedes GL
To replace the front brake discs and pads on this car model, it is advisable to lift it on a ramp and remove the front wheel; then disconnect the wear sensor …Read all…
Posted on 6 March 2026 by ScegliAuto
Mercedes Gl (2006-2012 / MK 1, X164)
Rear Discs and Pads Replacement
When replacing the rear brake discs, it is good practice to also replace the pads. Therefore, lift the vehicle and remove the rear wheel. Detach the retaining …Read all…
Posted on 28 February 2026 by ScegliAuto
Mercedes Gl (2006-2012 / MK 1, X164)
Replacement of Front Discs and Pads
Lift the vehicle on a ramp and remove the front wheel. Remove the retaining spring of the pads, the caps from the fixing pins of the brake caliper to …Read all…
Posted on 28 February 2026 by ScegliAuto
Shocks (1) Car stereo (1) Battery (1) Control arm (2) Control unit (1) Wheel rim (1) Key (1) Timing belt (1) Air conditioner (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Brake rotors (3) Fog lights (2) Air filter (3) Cabin air filter (3) Parking brake (1) Window switch (1) Light bulb (1) Side marker bulb (1) Headlight bulb (4) Starter motor (1) Transmission fluid (1) Clock (4) Door trim panel (2) Front bumper (1) Rear bumper (1) Car door (3) Power window switch (1) Instrument cluster (1) Radiator (1) Fuse box (7) AdBlue warning light (2) Warning light – error code (2) (1) Service warning light (10) Fuel cap (2) Windshield wipers (1) Drivetrain (2) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos