Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exhaust Manifold from the Mercedes S-Class?

Model: Mercedes Classe S W222, MK 6 - Years 2013-2020
Part: Checks and maintenance

Before removing the exhaust manifold from the Mercedes S-Class, disconnect the battery and remove the outer heat shield by loosening the screws shown in the video. Next, remove the inner heat shield, then loosen the screws on the cooling pipe at the exhaust gas recirculation actuator. After removing the oil and water pipes, remove the flange of the exhaust gas recirculation system. At this point, you can remove the nuts located on the top and bottom of the exhaust manifold and extract it from its housing.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter on a Mercedes S-Class W223
How to Change the Cabin Air Filter on a Mercedes S-Class W223
Mercedes Classe S (2020-2026 / W223) .. If you own the new Mercedes S-Class W223 and want to replace the cabin air filter yourself, just follow these steps. First, purchase.. …
How to Replace the Cabin Air Filter on the Mercedes W220
How to Replace the Cabin Air Filter on the Mercedes W220
Mercedes Classe S (1999-2005 / MK 4, W220) .. The cabin air filter in your Mercedes S-Class W220 (1999-2005) is undoubtedly one of the simplest components to replace on your own. First, park.. …
How to Replace the Key Battery of the Mercedes S-Class W222
How to Replace the Key Battery of the Mercedes S-Class W222
Mercedes Classe S (2013-2020 / W222, MK 6) .. battery in the smart key of your Mercedes S-Class W222 (2013-2020). First, locate the button on the bottom of the rear cover. Press it while removing.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos