Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes S-Class W222

Model: Mercedes Classe S MK 6, W222 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Battery

See other generations:
Video tutorial

The battery in your Mercedes S-Class W222 is located inside the trunk. First, lift the trunk lid and then remove the entire panel at the base of the trunk.

Once this is done, locate the vehicle's battery and use a suitable wrench to disconnect the negative terminal first, followed by the positive terminal. At this point, remove all the screws securing the battery and complete its removal.

Finally, follow the same steps in reverse order to install the new battery.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Mercedes S-Class W222
How to Replace the Key Battery of the Mercedes S-Class W222
Mercedes Classe S (2013-2020 / MK 6, W222) .. battery in the smart key of your Mercedes S-Class W222 (2013-2020). First, locate the button on the bottom of the rear cover. Press it while removing.. …
How to Replace the Key Battery in the Mercedes S-Class W222
How to Replace the Key Battery in the Mercedes S-Class W222
Mercedes Classe S (2013-2020 / MK 6, W222) .. located inside the key of your Mercedes S-Class W222 (2013-2020) is very simple, and by following this guide, you can complete it in just a few.. …
Where is the OBD port located in the Mercedes S-Class W222?
Where is the OBD port located in the Mercedes S-Class W222?
Mercedes Classe S (2013-2020 / MK 6, W222) .. If you own a Mercedes S-Class W222 and want to find out where the OBD port is located, all you have to do is carefully read the.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos