Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Display/Navigator on the Mercedes CL

Model: Mercedes CL C216, MK 3 - Years 2006-2013
Part: Car stereo

In this video tutorial, you will learn how to remove the display or navigator on the Mercedes CL W216 (CL550) by following the instructions below. First, get inside the vehicle and start by removing the plastic cover above the display, prying it off from the sides; then remove the side button panel by disconnecting the electrical connector at the back, as shown in the video. At this point, unscrew the fixing screws on the sides to remove the display; finally, reassemble everything by reversing the procedure!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Mercedes CL C216
How to Replace the Key Battery on a Mercedes CL C216
Mercedes CL (2006-2013 / C216, MK 3) If you want to find out the procedure required to correctly replace the button battery in your Mercedes CL C216 key (2006-2013), read this new guide …
How to replace the stock radio of the Mercedes CL.
How to replace the stock radio of the Mercedes CL.
Mercedes CL (1999-2006 / C215, MK 2) Briefly, we will see the instructions that will allow us to disassemble and replace the stock radio in the Mercedes CL. First, let's get inside the c…
How to Replace the Panoramic Roof on a Mercedes CL
How to Replace the Panoramic Roof on a Mercedes CL
Mercedes CL (2006-2013 / C216, MK 3) To replace the panoramic roof on a Mercedes CL, fully open it to locate the seal and mechanism positioned inside. Here, loosen the screws securing th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos