Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stock radio of the Mercedes CL.

Model: Mercedes CL C215, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car stereo

See other generations:
Video tutorial

Briefly, we will see the instructions that will allow us to disassemble and replace the stock radio in the Mercedes CL. First, let's get inside the cabin and start by removing the gear shift knob; we remove the plastic cover at the base and unscrew the fastening screws, then remove the center console along with the radio (disconnecting the electrical wiring located at the back), as shown in the video.

At this point, we carry out the repair or replacement of the radio with the new one, reassembling it and checking its functionality!


Posted on 28 December 2025 by ScegliAuto


Related tutorials

Where Are the Fuses Located on the Mercedes CL?
Where Are the Fuses Located on the Mercedes CL?
Mercedes CL (2006-2013 / C216, MK 3) The fuses on the Mercedes CL are contained within dedicated fuse boxes installed in the vehicle. In this type of car, you can find four boxes for hol…
How to Replace the Key Battery on a Mercedes CL C216
How to Replace the Key Battery on a Mercedes CL C216
Mercedes CL (2006-2013 / C216, MK 3) If you want to find out the procedure required to correctly replace the button battery in your Mercedes CL C216 key (2006-2013), read this new guide …
Replacing the Cabin Air Filter of the Mercedes CLA250 C118
Replacing the Cabin Air Filter of the Mercedes CLA250 C118
Mercedes CL (1999-2006 / C215, MK 2) To ensure that clean air enters the ventilation circuit at the intake of the Mercedes CLA 250, a filter is installed that retains impurities, which w…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos