Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Mercedes CL C216

Model: Mercedes CL C216, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

If you want to find out the procedure required to correctly replace the button battery in your Mercedes CL C216 key (2006-2013), read this new guide carefully and put into practice what is described. First, press the button located at the top of the cover and simultaneously pull out the physical emergency key. Then, use this key to remove the rear cover and proceed to replace the old battery with a new one (model CR2025).


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the Mercedes CL?
How to Replace the Remote Battery on the Mercedes CL?
Mercedes CL (2006-2013 / C216, MK 3) In this tutorial, you will see how to replace the remote battery on the Mercedes CL, a very simple and quick operation. You will need a small flathea…
How to Remove the Rear Seats of the Mercedes CL?
How to Remove the Rear Seats of the Mercedes CL?
Mercedes CL (2006-2013 / C216, MK 3) To remove the rear seats of the Mercedes CL, use a tool to pry off the trim located at the front of the seat base. Once this trim is removed, you can…
How to Replace the Panoramic Roof on a Mercedes CL
How to Replace the Panoramic Roof on a Mercedes CL
Mercedes CL (2006-2013 / C216, MK 3) To replace the panoramic roof on a Mercedes CL, fully open it to locate the seal and mechanism positioned inside. Here, loosen the screws securing th…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos